For distributors, lighting brands and project buyers

LED Neon Flex for OEM and Project Supply

Source wholesale LED neon flex for architectural lighting, signage and decorative projects. Compare bending styles, round profiles and DMX512 RGBW options, then request a quote for your configuration.

Minimum order value: USD 1,000 in goods per order.

Two overlapping white neon ring lights on a dark, wet surface with scattered droplets.

Side-bend neon flex sample. Select the profile and configuration for your installation below.

Neon Flex Selection

OEM Configuration Review

Model-Specific Documents

USD 1,000 Order Value

B2B Project Supply

Compare LED Neon Flex for Bulk and Project Orders

Start with the shape of the light line and the direction it must bend. Then confirm light color, control, dimensions and installation conditions. These six entries provide different ways into the range: bend direction, round emission, a control-specific product and a general overview.

Close-up of warm-white LED light strips curved in circular loops, overlapping on a reflective surface.

Choose by bending plane

Top Bend LED Neon Flex

Compare top-bend LED neon flex for architectural outlines and curved light lines where the emitting face and permitted bending plane match the drawing.

Selection details: Profile size, emitting-face orientation, bend limit, cut interval and mounting space.

NPHIS side-bend silicone neon flex for architectural lighting, showing uniform 3000K light from a NEON 1010 profile.

Choose by bending plane

Side Bend LED Neon Flex

Explore side-bend silicone neon flex for commercial signage, contours and display details. Match the smallest curve and finished lengths to the selected model.

Selection details: Bending direction, visible line width, channel fit, end caps and cable exits.

Flexible LED light strip glowing in a sine-wave on a dark surface, creating a modern decorative shape.

Choose for a changing curve

3D Bendable LED Neon Flex

Evaluate 3D bendable LED neon flex for curved lighting features that change direction. Check the approved bending shapes and limits in the model instructions.

Selection details: Permitted bending directions, installation diameter, profile size and support arrangement.

Abstract photo of a glowing white neon light forming a curved, S-shaped loop against a dark background.

Choose by all-around emission

360° Round LED Neon Flex

Compare round neon flex for decorative light lines viewed from multiple sides. Select the diameter and finish, then confirm the mounting or suspension detail.

Selection details: Diameter, smooth or woven finish, viewing direction, supports and end-cap dimensions.

Abstract composition of intertwined glowing neon rings in blue, green, and yellow against a black background.

Choose by programmed control

DMX512 RGBW LED Neon Flex

Review DMX512 RGBW neon flex for programmed color-changing projects. Confirm the exact electrical version, addressing and controller requirements before quotation.

Selection details: Voltage, power, channels, addressing, cut interval, signal wiring and feed layout.

Waterproof Top Bend LED Neon Flex with water droplets, IP67 silicone neon flex, outdoor weather resistant flexible neon strip light

Explore the broader product range

Silicone Neon Lights Overview

Use the general silicone neon lights page when you are still comparing formats. Move to a specific series and model datasheet to finalize the quoted configuration.

Selection details: Application, bend direction, light color, profile dimensions and required supply scope.

Choose Neon Flex Around the Drawing and Light Effect

For custom LED neon flex projects, confirm the emitting face and required bending plane before choosing a profile. Round emission describes where light is visible; DMX512 describes control. These features can overlap. Use the neon flex dimensions and fit guide when checking channels and end-cap clearance.

Purchasing requirement Product entry Confirm before quotation

A curve in the top-bending plane

Confirm the emitting-face orientation and approved bend for the selected profile.

Lettering or contours in the side-bending plane

Check the smallest curve, cut positions and end-cap space against the sign drawing.

A light line that changes bending direction

Confirm the permitted bending shapes, installation diameter and support details.

A round light line viewed from several sides

Choose diameter and finish, then confirm mounting, suspension and connections.

Programmed RGBW color effects

Confirm the electrical version, control channels, addressing and wiring layout.

An early-stage brief without a chosen profile

Define the application and configuration, then review a specific model datasheet.

Compare the complete supply scope: neon flex, prepared lengths, end caps, leads, mounting accessories, power supplies and controls. Include installation labor, access for maintenance and any custom tooling when comparing bulk quotations.

Silicone LED Neon Flex for Commercial Lighting Projects

Use the application to define the light line, viewing conditions and installation detail. The images are application references; the selected product and assembly determine the final result.

For LED neon flex for building facades and architectural outlines, send elevations showing curves, mounting surfaces, cable routes and service access. Describe rain, condensation, sunlight and other exposure. Compare top-bend profiles and side-bend profiles against the drawing, then review the neon flex installation guide.

Two outdoor details side by side, a visible neon flex line along a parapet edge and a hidden strip lighting a recessed cove

For silicone neon flex for commercial signage and retail displays, provide letter shapes, the tightest curve, visible line width and viewing distance. Check cut positions, end-cap space and how separate pieces meet. Start with the side-bend neon flex range when its bending plane matches the design; confirm the permitted bend for the exact model.

For decorative curves, compare 3D bendable neon flex with 360° round LED neon flex according to movement and viewing direction. For programmed color effects, review DMX512 RGBW neon flex and specify the controller, addressing, cable layout and intended scenes.

Prepare an Architectural LED Neon Flex Specification

A drawing and a short configuration brief help align engineering and purchasing. Define these four groups of inputs before comparing models or requesting custom-length silicone neon flex.

01 / Bend Direction & Emitting Face

Mark the emitting face, bending plane and tightest curve on the drawing. State whether a dimension is a radius or diameter. Use the top-bend selection guide or side-bend selection guide for orientation, then confirm the selected model’s approved bending limits.

02 / Profile, Cut Lengths & Connections

Provide the available channel space, finished lengths, quantities, cable exits and connector clearance. Distinguish the cut length from the assembled length including end caps. The profile tolerance and end-cap guide helps organize these checks; use the approved model drawing for final dimensions.

03 / Power Supply & Feed Layout

Specify voltage, power, length of each section and cable distance from the driver. Confirm permitted feed lengths and access for service. Include Mean Well power supplies in the RFQ if required, or compare the LED power-supply range. A reel length is not a permitted single-feed run.

04 / Environment, Color & Control

Describe the installation environment, white CCT and CRI requirements, or RGB/RGBW effects. State the dimming system or control protocol. For DMX512 RGBW neon flex projects, confirm channels, addressing and wiring with the selected configuration. Check the complete assembly, including cut ends and connections.

Custom-Length LED Neon Flex and OEM Supply

For lighting brands, distributors and project contractors, an OEM neon flex order starts with a defined product and supply scope. Provide your fixed requirements and acceptable alternatives so the proposed configuration can be reviewed before production.

Neon Flex Configuration

Specify profile size, bend direction, emitting face, voltage, power, white-light requirements or color effects, control protocol and environment. Custom feasibility and the applicable model documents are confirmed for the requested configuration.

Custom Lengths & Assembly

For custom-cut neon flex with leads and end caps, send a segment schedule with quantities, finished lengths, cable exits and connection details. Confirm cut intervals, sealing, mounting accessories and supplied components. Review installation and connection planning before finalizing the brief.

Private Label & Packaging

For private-label LED neon flex orders, provide brand artwork, label content, barcodes and reel or segment packaging requirements. Identify carton quantities and replenishment plans. Ask for tooling, testing and special packaging costs to be listed separately where applicable.

Keep quotations comparable: confirm the neon flex configuration, ordered quantity, assembly work, accessories, packaging, required documents and shipping terms. Custom lengths can affect cutting yield and processing costs; include the complete segment list.

Approve Neon Flex Samples Before Bulk Purchasing

Agree the sample scope, charges and evaluation criteria before a bulk LED neon flex order. Evaluate the selected product in a representative mounting and electrical arrangement.

Use the proposed profile, end caps, mounting system, power supply and controls. Check:

  • Emitting-face orientation and the tightest approved curve
  • Finished length, end-cap clearance and channel fit
  • Color, visible joints and appearance from the intended viewing position
  • Feed arrangement, control behavior and operating conditions

Refer to the neon flex fit and tolerance guide when recording acceptance criteria.

Series of components for a framing system: cable-entry end caps, end plug, mounting clip, mounting profile, and bendable profile.

For distributor replenishment and repeat OEM orders, record the model, specification revision, approved sample, light color, connections and packing details.

Reconfirm revisions and material or assembly changes before reordering. Keep the same acceptance basis for adjacent light lines and repeat installations.

LED Neon Flex Catalog, Drawings and Project Documents

Use the neon flex catalog to shortlist profiles, then request the documents for the configuration being quoted. The NPHIS download center also provides access to other product catalogs.

Model Datasheet & Drawings

Check profile dimensions, bend direction, voltage, power, light-color version, cut interval, approved run limits and end-cap details. A parameter from one model or color version does not describe the entire range.

Wiring & Mounting Details

Request the feed arrangement, cable exits, mounting accessories and controller or driver requirements. Use the installation guide to prepare questions and the selected model’s instructions for assembly.

Market Documents & Custom Testing

Include the destination market and required documents in the RFQ. NPHIS LED Neon Strip EMC and RoHS documents are available; confirm that the selected model and supplied configuration are within the applicable scope.

For additional certification work: agree the test scope, cost and schedule in the quotation. The stated estimate is approximately 7–15 days, and activities may overlap production; confirm the complete order schedule separately.

Turn Your Neon Flex Shortlist into a Complete RFQ

Use these four steps for wholesale neon flex purchasing, OEM development or a project quotation.

Cross-section diagram of a hopper-style chamber with a tilted blade and a small block, labeled callouts 1–6.

01 · Send the RFQ

Share the profile, drawings, quantities, finished lengths, light effect and destination.

Diagram of end caps and cables: wrapped end caps with straight cable and end cap shown together in the top row.

02 · Compare the Scope

Confirm the model, assembly, accessories, packaging and applicable documents.

Laboratory scene with a large green spherical chamber on a stand connected to a control cabinet and computer monitor on the left.

03 · Agree Sample Approval

Agree the sample configuration, test conditions and acceptance criteria.

Long LED strip assembly line in the NPHIS China LED strip factory; staff work at numbered benches with blue totes and LED boards ready for soldering QC.

04 · Confirm the Schedule

Confirm material availability, production timing and shipping requirements.

Your LED Neon Flex Supply Contact in China

NPHIS (Shanghai) Technology Co., Ltd. serves international B2B customers. NPHIS and Shanghai Leimei Optoelectronics Technology Co., Ltd. are under common ownership. Shanghai Leimei was established in 2012.

When choosing an LED neon flex manufacturer or supply partner in China, compare the selected configuration, model documents and written supply scope. Learn more about NPHIS or contact the sales team with your project requirements.

Wholesale LED Neon Flex: Procurement Questions

Answers for product selection, custom orders and purchasing. For wider ordering questions, visit the NPHIS FAQ center.

Purchasing Terms at a Glance

Use these terms to prepare your inquiry. Confirm the selected configuration, supplied components and order schedule in the quotation.

USD 1,000

Minimum order value in goods per order. Include your expected quantity and purchasing scope in the RFQ.

5–7 days

Indicative production lead time for standard configurations using existing materials.

15–30 days

Indicative production lead time for fully custom orders, depending on quantity and process complexity.

CE / RoHS

Request documents for the selected model and destination. Additional certification work requires an agreed scope, cost and schedule.

How do I choose LED neon flex for a wholesale or project order?

Start with the drawing: emitting face, bending plane, tightest curve and available installation space. Compare Top Bend, Side Bend and 3D bendable neon flex, then confirm light color, power and controls. The selected model’s dimensions and approved bending limits determine its fit.

3D describes the permitted bending behavior; 360° round describes emission around a round profile. They are different selection criteria. Compare the 3D product instructions with the round neon flex range, and confirm both mechanical limits and the required viewing effect.

State the required light color and control system separately. RGB or RGBW identifies the color channels, while DMX512 identifies a control protocol. Review the DMX512 RGBW product page for that product and request a specification for other custom configurations. Do not transfer white-light power or cut-interval data to a color-changing version.

Describe rain, condensation, sunlight, temperature and any chemical or water exposure. Request the protection rating and supporting information for the selected configuration, including end caps, joints and cable entries. An IP rating does not by itself establish suitability for every outdoor environment or continuous immersion.

Provide a segment schedule with finished lengths, quantities, cable exits and end-cap requirements. Lengths must respect the selected circuit’s cut interval. Confirm whether pieces are supplied finished or approved for field cutting, and follow the model’s sealing instructions. Review the installation guide when preparing the brief.

Define whether you need reel material or prepared segments, mounting channels or clips, leads, connectors, end caps, power supplies and controls. Include the feed plan and cable distances. Request Mean Well power supplies if needed, and confirm all supplied components and shipping terms in the quotation.

Yes. Send the intended configuration, sample quantity, drawings and packaging requirements for review. Confirm sample availability, charges, tooling where needed and the evaluation schedule before ordering. For bulk approval, agree the sample and specification revision, installation arrangement and acceptance criteria.

The minimum order value is USD 1,000 in goods per order. It is an order-value requirement, not a fixed number of meters per model or color. Send your configurations and quantities so the purchasing scope can be reviewed; sample terms are confirmed separately.

Standard configurations using existing materials typically require about 5–7 days. Fully custom orders typically require about 15–30 days, depending on quantity and process complexity. Confirm the production schedule and any testing work in the quotation. These estimates do not include a promised transit or arrival date.

The standard commercial warranty is 3 years. Eligible special or custom configurations may have coverage of up to 5 years under agreed quotation terms. Confirm the covered configuration, operating conditions and remedy in the order documents. A warranty period is separate from an operating-lifespan claim.

Quality Evaluation for Bulk Neon Flex Orders

Use the equipment and process references below to discuss the checks needed for your order. Agree the selected model, test conditions, sample basis and acceptance criteria; request the relevant results for that configuration.

LED Neon Strip EMC and RoHS Documents

The displayed documents identify NPHIS LED Neon Strip and Shanghai Leimei Optoelectronics Technology Co., Ltd. Match the quoted model and configuration to the document scope. Request the applicable files for your purchasing or project-submittal review.

EMC Documentation

LED Neon Strip document HTT202606891E

RoHS Documentation

LED Neon Strip document HTT202606891R

Model & Configuration

Match the quoted version to the applicable document scope.

Destination Requirements

Identify any additional documents or testing in the RFQ.

Request a Wholesale or OEM LED Neon Flex Quote

Send your drawing, reference model and purchasing quantity. For an architectural lighting or signage project, describe the required light effect and installation space so we can review the product and supply scope with you.

  • Company, buyer role, application and destination
  • Product entry, profile size, bend direction and emitting face
  • Quantity and finished length of each segment
  • Voltage, white-light requirements or RGB/RGBW effects and control protocol
  • Environment, mounting method, cable exits, end caps and accessories
  • Power supply, labels, packaging, required documents and target schedule

Minimum order value: USD 1,000 in goods per order. Sample terms, configuration, supply scope and schedule are confirmed in the quotation.

Related LED Products for Your Project

Compare flexible LED strips for concealed light lines, LED sheets for area backlighting and power supplies for the selected electrical load.

Scroll to Top