360° LED Neon Flex

360° SILICONE NEON FLEX · D-SERIES MANUFACTURER

All-around light for suspended and sculptural designs

360° LED neon flex is a round silicone lighting profile that emits light around its circumference. NPHIS supplies Ø16–Ø50 mm profiles for suspended decorative lighting, retail displays and sculptural light lines. Compare ten catalog white-light configurations, including smooth and woven finishes, below.

For contractors, distributors and OEM buyers. RGB light colors and SPI or DMX512 control can be customized across the D series, with specifications agreed before production. Send the diameter, finish, quantity, finished lengths and installation layout to request a sample or project quotation.

24 V DC input · IP67 catalog rating · Ø16–Ø50 mm · Smooth and woven finishes

22mm smooth 360 degree round LED neon flex coiled into three loops in warm white light, fixed by white straps with side power cable, even diffused glow on black background
D20 360 degree neon flex · warm white color
CATALOG CONFIGURATIONS
10
CATALOG INPUT
24 v DC
NOMINAL LENGTH
5 m
EMISSION
360 °

DIAMETER & CONFIGURATION

Compare round profiles and white-light specifications

Start with the diameter and surface finish, then compare cut interval, power and light output. These tables describe the catalog white-light versions; custom RGB, SPI and DMX512 versions require a separately confirmed specification.

01

SMALL DIAMETER · SMOOTH

Ø16–Ø20 mm for a finer round light line

Compare D16, D18 and D20 for the available space and visual scale. D16 smooth has a 35.71 mm cut interval; D18 and D20 use 50 mm. Confirm the matching end caps and supports with the sample.

****Smooth 16mm 360 degree round LED neon flex strip glowing cool white, bent into smooth S-curve, flexible silicone neon tube for architectural ambient lighting
0408 · 4 × 8 mm white-light profile
Model Outside diameter
(mm)
Light / finish LEDs/m Cut
(mm)
Power
(W/m)
Output
(lm/m)
Nominal length
(m)
D16
Ø16
White / smooth
168 × 2
35.71
16
1295–1422
5
D18
Ø18
White / smooth
120 × 2
50
22
1275–1540
5
D20
Ø20
White / smooth
120 × 2
50
20
760–1280
5

Catalog white-light versions: 24 V DC · IP67 · 3000 K ±150 K, 4000 K ±200 K or 6500 K ±300 K. CRI Ra ≥90.

02

MEDIUM DIAMETER · SMOOTH

Ø22–Ø25 mm for visible decorative curves

D22 and D25 provide two round profile sizes for decorative layouts. Both catalog configurations are 20 W/m with 50 mm cutting intervals. The photograph shows D22 in warm white; choose the required CCT in the order specification.

Factory direct waterproof silicone neon flex, available in multiple colors, supporting custom silicone LED neon flex orders.
0816 · 20 m configuration
Model Outside diameter
(mm)
Light / finish LEDs/m Cut
(mm)
Power
(W/m)
Output
(lm/m)
Nominal length
(m)
D22
Ø22
White / smooth
120 × 2
50
20
1260–1363
5
D25
Ø25
White / smooth
120 × 2
50
20
1140–1276
5

Catalog white-light versions: 24 V DC · IP67 · 3000 K ±150 K, 4000 K ±200 K or 6500 K ±300 K. CRI Ra ≥90.

03

LARGE DIAMETER · SMOOTH

Ø30–Ø50 mm for a larger luminous outline

Compare D30, D40 and D50 by diameter and catalog output. A larger diameter changes the visible scale and mounting envelope; it does not automatically mean higher light output. Confirm the support arrangement for the intended shape.

Close-up of 22mm smooth 360 round LED neon flex with RGB gradient blue to yellow, water droplets on tube surface and water puddle on black wet surface, waterproof IP67 silicone neon strip
1018 · three-side emitting profile
Model Outside diameter
(mm)
Light / finish LEDs/m Cut
(mm)
Power
(W/m)
Output
(lm/m)
Nominal length
(m)
D30
Ø30
White / smooth
120 × 2
50
20
760–1280
5
D40
Ø40
White / smooth
120 × 2
50
20
760–1240
5
D50
Ø50
White / smooth
120 × 2
50
20
800–1220
5

Catalog white-light versions: 24 V DC · IP67 · 3000 K ±150 K, 4000 K ±200 K or 6500 K ±300 K. CRI Ra ≥90.

04

WOVEN SURFACE · D16 & D22

A textured surface with its own specification

Choose D16 or D22 woven for a textured appearance. The photo shows a custom D16 RGB color-chasing version; the table below lists white-light versions only. Compare the selected finish both lit and unlit on a sample.

Braided woven 16mm 360 degree RGB LED neon flex coiled into circle, dynamic multi-color rainbow chasing effect with metal end connector, custom addressable neon strip
1023 · all-black SPI-RGB profile
Model Outside diameter
(mm)
Light / finish LEDs/m Cut
(mm)
Power
(W/m)
Output
(lm/m)
Nominal length
(m)
D16 woven
Ø16
White / woven
120 × 2
41.66
22
680–1120
5
D22 woven
Ø22
White / woven
120 × 2
50
20
620–1020
5

Catalog white-light versions: 24 V DC · IP67 · 3000 K ±150 K, 4000 K ±200 K or 6500 K ±300 K. D16 woven: CRI Ra ≥90. D22 woven: CRI is not listed in this catalog; confirm it with the required CCT.

Specification basis: NPHIS LED Neon Flex Catalog 2026–2027, printed P38–P48, 360° configurations only. D numbers identify the outside diameter. The 5 m nominal length and illustrated 5015 mm assembly length are different measurements; neither establishes an allowed single-feed length. Confirm the order drawing, end caps and feed plan. Output ranges are catalog references for the listed white-light options.

MATCH THE LIGHT LINE

Choose all-around emission for the viewing angles

360° Round LED neon flex is useful when the light line is viewed from several sides. The 360° designation describes emission around the profile; it does not establish unlimited bending or twisting. Submit the proposed curve and support layout for the selected model.

Suspended decorative lines

Use a round luminous profile where people can see a suspended line from different directions. Agree the suspension points, cable route and support hardware before approving the installation drawing.

Retail and display features

Compare the diameter, finish and white tone against the display scale and viewing distance. Confirm the space required by clips, connectors and power leads as well as the visible lamp body.

Sculptural lighting details

Plan curves around the selected model’s approved bending requirements. If the route needs bends in multiple planes, compare 3D LED neon flex configurations and confirm mechanical suitability separately from emission angle.

****Technical dimension drawing of 16mm 360 round LED neon flex, showing φ16mm cross section, 35.71mm cutting interval and 5015mm roll length with 200mm lead wire
D16 long-run profile dimensions and 35.71 mm cut interval

Approve the curve, supports and finished length

The D16 smooth drawing illustrates a 35.71 mm cut interval and 5015 mm assembly length. Request the minimum bend requirement and suspension spacing for the exact profile. Do not infer these limits from the 360° emission designation or the nominal 5 m length.

BUILD THE COMPLETE ASSEMBLY

Specify end caps, cable exits and mounting together

End cap and cable outlet options for 22mm 360 round LED neon flex, wrapped and uniform-width customizable designs with straight or side cable outlet
D22 example: wrapped and uniform-width end caps and cable-exit options

End caps and cable exits

The D22 drawing shows wrapped ends and custom uniform-width ends, with straight or side cable exits as illustrated. Confirm the selected end-cap envelope, cable specification, sealing method and finished length in the order drawing.

Mounting kit for 22mm 360 round LED neon flex, U-shaped plastic clips 26.3x28.5x12mm, hanging rope and screws, clip-on and rope-sling installation methods
D22 example: mounting clip, Suspension wire

Clips and suspension hardware

The D22 catalog illustrates clips and a rope-sling arrangement. Match the hardware to the actual diameter and finish. Agree support spacing, anchorage and cable strain relief for the installation; the illustration does not specify a universal unsupported span.

Agree the cutting and sealing method before the order. Use the LED neon flex installation guide, the 360° round neon flex installation and specification guide and the dimensional tolerance and channel-fit guide alongside the model-specific drawing.

POWER & CONTROL

Match power and control to the ordered version

Catalog white-light versions

The listed white-light versions use 24 V DC. Select one of the catalog CCTs and confirm the W/m and any dimming requirement. Separate 3000 K, 4000 K and 6500 K options do not mean tunable-white operation.

Custom RGB color

RGB versions can be customized across the D series. Agree the required color effects, power, supply voltage, cutting interval and wiring before production. The white-light tables do not specify the electrical or optical performance of an RGB version.

Custom SPI or DMX512 control

Confirm the IC, addressing method, controllable segment length, channel allocation and controller compatibility. LEDs/m is not a pixel count. Read the addressable neon flex control guide; the DMX512 RGBW neon product is a separate configuration reference, not the specification of a round D-series order.

Calculate the nominal LED load: selected W/m × connected meters. For example, 5 m of D22 smooth white at 20 W/m is 100 W before system design allowances. Check driver derating, lead length, conductor size, controller capacity and feed arrangement. This calculation is not approval for single-end feeding. Use the specified low-voltage DC supply; do not connect the neon flex directly to AC mains.

Review Mean Well LED power supplies and request a matched system for the installation route and conditions.

SAMPLE TO PRODUCTION

Approve a sample that represents the order

01 / Diameter and mounting

Check the actual outside diameter, smooth or woven finish, clip fit, approved curve, end caps and cable exits. Trial the intended mounting or suspension detail with the selected profile.

02 / Light and control

Check the white tone or RGB effect, measured power and appearance along the proposed run. For SPI or DMX512, verify addressing and effects using the intended controller, wiring and power supply.

03 / Assembly and records

Record finished lengths, sealing, leads, support arrangement and wiring. Agree acceptance limits and identify the approved sample so production and repeat orders use the same specification.

Use the dimension and mounting-fit checklist during sample approval. For project submittals, request the D-series EMC and RoHS documents, order drawing and wiring information. Learn more about NPHIS and use the technical document request route.

Order and production

Standard MOQ: USD 1,000 order value. Production with available materials is typically about 5–7 days; fully customized orders are typically about 15–30 days. Confirm sample costs, production timing and shipping scope in the quotation. These are production estimates, not arrival dates.

Commercial warranty

Standard warranty: 3 years. Eligible special or custom configurations may receive up to 5 years under agreed quotation terms. Warranty duration is separate from operating life; request any required lifetime evidence with the intended operating conditions.

Custom specification checklist: diameter and finish, RGB color requirements, SPI or DMX512 protocol, power, cut interval, IC and addressing, supply and wiring, end caps, installation environment and required documents. Confirm the specification before production.

PRODUCT DOCUMENTS

Keep the catalog and order drawing together

The ten 360° D-series configurations appear on printed P38–P48 of the NPHIS LED Neon Flex Catalog 2026–2027 (PDF pages 41–51, excluding the D20 270° page). Use the catalog to shortlist; request the current diameter, end-cap, mounting and wiring drawings for the ordered version.

PRODUCTION & DOCUMENTATION

Equipment and compliance documents

The equipment gallery shows an integrating sphere, a temperature and humidity chamber, photometric test equipment and a salt-spray chamber. For project test data, specify the model, light color, electrical configuration and operating conditions to be evaluated.

EMC and RoHS documents for the D series

EMC and RoHS documentation covers the D-series products presented here. The displayed NPHIS LED Neon Strip documents identify Shanghai Leimei Optoelectronics Technology Co., Ltd. as applicant and manufacturer. Include your destination market and documentation requirements in the enquiry to receive the files for project submittal.

Certificate of Conformity document from HTT Technology listing applicant and manufacturer details for LED Neon Strip products in Shanghai, dated 2026-06-26.
EMC · HTT202606891E
Certificate of Conformity document showing company name, address, product (LED Neon Strip), and RoHS compliance statement (HB/T Rob), with company logo in top right.
RoHS · HTT202606891R

BUYER QUESTIONS

Round neon flex: selection and procurement FAQs

Direct answers for product selection, installation planning and purchasing. Use the selected configuration and approved drawing for final decisions. Visit the NPHIS purchasing and technical FAQ for wider ordering questions.

Product and profile selection

360 degree LED neon flex is a round silicone lighting profile that emits light around its circumference. The NPHIS D series includes Ø16–Ø50 mm smooth profiles and D16/D22 woven versions for visible decorative light lines. The catalog tables show white-light configurations; RGB, SPI and DMX512 options can be customized to an agreed specification.

No. The 360° figure describes the light-emitting angle around the profile, not unrestricted bending or twisting. Confirm the permitted bend direction and minimum bend requirement for the exact model. For a route that changes planes, compare 3D neon flex options and submit the installation drawing for review.

Choose the outside diameter to suit the visual scale, mounting space and support hardware. This range covers Ø16, Ø18, Ø20, Ø22, Ø25, Ø30, Ø40 and Ø50 mm. Compare light output separately: a larger diameter does not automatically produce more lumens. Include end caps and leads in the space allowance and check diameter and mounting fit on a sample.

Smooth and woven describe the surface finish, and their electrical and optical specifications can differ. For example, catalog D16 smooth is 16 W/m with 35.71 mm cutting, while D16 woven is 22 W/m with 41.66 mm cutting. Compare the lit and unlit appearance and order the specific finish. A shared diameter does not make the two configurations interchangeable.

Round LED neon flex suits decorative lighting viewed from multiple directions, including suspended lines, retail displays and sculptural features. Choose the diameter, color and mounting detail for the intended view. Confirm bending requirements, supports and environmental conditions before using a proposed layout as the production design.

Yes. RGB light colors and SPI or DMX512 control can be customized across the D series, with specifications confirmed in advance. RGB identifies a light-color configuration; SPI and DMX512 identify control approaches. Confirm the model, power, cut interval, IC, addressing, supply, wiring and end caps. The catalog white-light figures must not be used as the specification for a custom color version.

Installation and power planning

Yes, at the marked positions for the ordered configuration. Catalog D16 smooth has a 35.71 mm cut interval, D16 woven 41.66 mm, and the other eight listed white-light configurations 50 mm. Custom versions need their own confirmed cut interval. Allow for end caps and leads, and agree cutting and resealing before installation. See the neon flex installation guide.

There is no single confirmed bend radius for all ten configurations on this page. Request the selected model’s drawing with the permitted bend direction and minimum radius or diameter clearly identified. Do not force sharp folds or use the 360° emission label as a bending limit. Submit the tightest curve and support layout for approval. See the installation planning guide alongside the model drawing.

Use hardware matched to the selected diameter and finish. The D-series catalog illustrates clips and rope-sling mounting; the order needs a confirmed support arrangement, anchorage and cable strain relief. Agree support spacing and the finished assembly before installation. Do not treat the electrical lead as a suspension support.

Use a matched 24 V DC power supply sized for the connected load and operating conditions. Calculate W/m × connected meters: 5 m of D22 smooth white at 20 W/m is 100 W before design allowances. Check driver derating, cable voltage drop, feed arrangement and any controller load limits. Review Mean Well power supply options; confirm custom-version requirements separately.

No. The catalog’s 5 m nominal length is not a universal single-feed allowance. Its illustrated 5015 mm assembly length is a separate dimension. The allowed powered run depends on the version, load, leads, conductor size and feed arrangement. Send the actual piece lengths and power layout for confirmation; this D-series page does not specify a 20 m feeding capability.

The listed white-light configurations carry an IP67 catalog rating. Outdoor ordering must also identify the end-cap sealing, cable entries, exposure and mounting conditions. Cutting or changing a connection needs an approved resealing process. IP67 alone does not establish suitability for permanent immersion, pools or every chemical or temperature environment; describe the installation in the enquiry.

Configuration, samples and ordering

Confirm the IC and protocol, addressing method, controllable segment length, channel allocation, controller, power and signal wiring, feed arrangement and required effects. LEDs/m is not the number of addressable pixels. For DMX512, agree whether the ordered system uses native DMX decoding or an interface to another protocol. Use the addressable lighting guide to prepare the control brief, then approve the actual sample.

Check the outside diameter, finish, clip fit, end caps, cable exits and approved curve. Verify white tone or RGB effects, measured power and appearance along the intended run using the proposed supply and controller. For addressable versions, test the agreed addressing and effects. Record finished lengths, seals, mounting and acceptance limits against the approved sample and drawing.

EMC and RoHS documentation is available for the D-series products. Request the catalog, ordered-configuration drawing, wiring detail and project submittal files through the technical download center. Include the destination market and required document format so the document package can be prepared with the quotation.

The standard MOQ is USD 1,000 order value. Production with available materials is typically about 5–7 days; fully customized orders are typically about 15–30 days. Final timing depends on the confirmed specification, quantity and sample approval. Confirm sample cost, production schedule and shipping scope in the quotation; these estimates are not delivery-date commitments.

The standard warranty is 3 years. Eligible special or custom configurations may receive up to 5 years under agreed quotation terms. A warranty period is not a measured operating-life rating. Service life depends on the electrical, thermal, sealing and installation conditions. Request any required lifetime test evidence for the intended configuration instead of assuming one universal hour figure.

Diameter, finish, color/control configuration, quantity, finished lengths and assembly scope affect the quotation. Send a drawing or bill of materials with mounting, supply, controller, cable exits, end caps, destination and timing. State whether the price should include accessories, documents, packaging and freight, and identify any tooling or sample requirements. Request a round neon flex project quote with these details.

REQUEST A PROJECT QUOTE

Send your round neon flex project requirements

Tell us the light-line layout and the D-series configurations you are considering. Include the details below so the sample and quotation represent the complete assembly you need.

  • Diameter, smooth or woven finish, quantity and finished length of each piece
  • White CCT or RGB effects; SPI or DMX512 requirements, if needed
  • Installation environment, curves and suspension or fixed mounting method
  • Supply, controller, feed plan, cable exits and end caps
  • Destination, required documents, project timing and supply scope

For a separate enquiry, open the project quotation page. Find the team’s details on the NPHIS contact page.

主页联系表单
Scroll to Top